REMARKS :
#
All camshafts have sleeve for distributor drive. X1/9 type camshafts with spline drive are NOT available
#
all camshafts have sleeve for distributor drive. X1/9 type camshafts with spline drive are NOT available
#
sport version for Fiat128 and for OEM camshafts from 9mm to 9.7mm OEM camlift.
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15° before TDC on exhaust, and after TDC on intake
#
valve seals must be lowered, race valvespring kit is required (available on special request only)