REMARKS :
#
Camshafts for use with OEM mechanical cam followers. Please check the following dimensions before ordering:
- short intake camshaft
- long exhaust camshaft, grooves in cam bearings, slot for distributor drive
- cam follower diameter: 30.0mm
- shim diameter: 27.0mm (between cam and cam follower)
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15° before TDC on exhaust, and after TDC on intake
#
STD valve springs can be used until STD rpm limit
#
stand alone ECU based on throttle position sensor advised