REMARKS :
#
Camshafts for use without Vtec system, using outer cam lobes and outer rocker arms only:
- the complete rocker arm assembly is replaced by two Cat Cams slipper rocker arms and a spacer
- profiles with a more aggressive design to fully exploit the more stable valve train
- Leave the VTEC solenoid constantly in the "VTEC ON" position (high oil pressure) to allow sufficient oil supply to the complete cylinder head.
#
for TURBO conversion (atmospheric to turbo)
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15° before TDC on exhaust, and after TDC on intake
#
ONLY for use in competition engines with independent engine management (throttle position sensor) or carburettors