REMARKS :
#
- roller rocker arms with lash adjustment screw
- bearing diameters: 32.0mm
- cam base diameter: 34.0mm (1 bearing cap for complete camshaft)
- 2 intake + 1 exhaust cam lobes per cylinder
- no VVTL
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15° before TDC on exhaust, and after TDC on intake
#
ONLY for use in competition engines with independent engine management (throttle position sensor) or carburettors