tarmac rally - race

Volkswagen 2E(92-94), ADY (94-95), AGG (95-97) hydraulic tappets, 7mm valves, MK-7H

I-4cyl 2.0L 8v SOHC (DTH/DTH)

#

use PAC-D12009 (GOLD quality) for applications over 12.5mm valve lift / 8500rpm

#

if required, use extra shims to increase spring load

#

to use these camshafts in cylinderheads with hydraulic followers in O.E.M. version:

- change hydraulic followers for mechanical tappets (ref. CC005)

- use cam base circle diameter of maximum 34mm (SPECIFY WHEN ORDERING)

#

FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:

-

the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed

-

distance between valve seal and retainer at full lift must be 0.6mm at least

-

minimum valve spring travel of 1.0mm at full lift must be provided

-

distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15° before TDC on exhaust, and after TDC on intake

#

ONLY for use in competition engines with independent engine management (throttle position sensor) or carburettors