7606703
tarmac rally - race
Volkswagen AUA, APE, BBY, BKY 75hp (belt drive, no VVT)
I-4cyl 1.4L 16v DOHC (RPRH/RPRH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: hydro
hydro
duration @ 0.1mm
: 297°
297°
duration @ 1.0mm
: 243°
243°
valve lift
: 11.55mm
11.55mm
cam lift
: 5.80mm
5.80mm
lobe angle
: 106°
106°
timing @ 1.0mm
: 14° / 49°
49° / 14°
valve lift @ TDC
: 2.45mm
2.45mm
parts setup:
cam wheels :
:
:
follower
: O.E.M.
: O.E.M.
valve lash
: O.E.M.
: O.E.M.
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: View 99480/s
: View 99480/s
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: View PAC-E99864
: View PAC-E99864
interior spring
fitted load / length
: 26kg @ 31.3mm
: 26kg @ 31.3mm
max. load / lift
: 59kg @ 12.0mm
: 59kg @ 12.0mm
REMARKS :
REMARKS :
#
These camshafts can only be used for engines without VVT system. They cannot be used in engines with VVT system, even when the VVT system is disabled
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15° before TDC on exhaust, and after TDC on intake
#
ONLY for dirt track applications and pro street use with adjustable engine management or carburettors