1002460
full race
Audi AAN, ABY, RR turbo
I-5cyl 2.2L 20v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: 0.25mm
0.25mm
duration @ 0.1mm
: 290°
274°
duration @ 1.0mm
: 246°
230°
valve lift
: 12.00mm
11.00mm
cam lift
:
lobe angle
: 110°
120°
timing @ 1.0mm
: 13° / 53°
55° / -5°
valve lift @ TDC
: 2.80mm
0.75mm
parts setup:
cam wheels :
:
:
follower
: View CC005
: View CC005
valve lash
: View TS102
: View TS102
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: View 99370
: View 99370
lower retainer
: not available
: not available
exterior spring
: View PAC-E15009
: View PAC-E15009
interior spring
: View PAC-I15009
: View PAC-I15009
fitted load / length
: 35kg @ 35.0mm
: 35kg @ 35.0mm
max. load / lift
: 111kg @ 14.0mm
: 111kg @ 14.0mm
REMARKS :
#
check distance between valve seal and retainer to be at least 0.6mm at full lift
#
if required, machine cylinder head and / or use solid shims to adjust spring load
REMARKS :
#
- steel billet camshafts
- supplied with adjustable chain sprockets to optimize intake cam timing
#
- valve clearance is to be adjusted using mechanical lash caps
-
please make sure that the lash cap does not touch the valve locks !
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15° before TDC on exhaust, and after TDC on intake
#
ONLY for use in competition engines with independent engine management (throttle position sensor) or carburettors