1300732
full race
Bmw M30 150hp
I-6cyl 2.5L 12v SOHC (RP/RP)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: 0.20mm
0.20mm
duration @ 0.1mm
: 320°
320°
duration @ 1.0mm
: 280°
280°
valve lift
: 12.00mm
12.00mm
cam lift
: 9.65mm
9.65mm
lobe angle
: 104°
104°
timing @ 1.0mm
: 36° / 64°
64° / 36°
valve lift @ TDC
: 5.05mm
5.05mm
parts setup:
cam wheels :
:
:
follower
: View INFO
: View INFO
valve lash
: O.E.M.
: O.E.M.
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: View 99326
: View 99326
lower retainer
: not available
: not available
exterior spring
: View PAC-E95009
: View PAC-E95009
interior spring
: View PAC-I95009
: View PAC-I95009
fitted load / length
: 40kg @ 34.0mm
: 40kg @ 34.0mm
max. load / lift
: 111kg @ 13.0mm
: 111kg @ 13.0mm
REMARKS :
#
larger excenter discs (part number "99019" - D18mm) available to adjust valve clearance for camshafts with reduced cam base diameter
#
Cat Cams steel billet rocker arms (part number "CAT021") are strongly advised for use over 7000rpm
REMARKS :
#
13007xx: pre motronic
13008xx: motronic 1
13009xx: motronic 2
BMW_M10-M30_rocker_arm.gif NOW AVAILABLE: CATCAMS steel billet rocker arms (coated) with original Mahle valve adjustment screws !!!
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15┬░ before TDC on exhaust, and after TDC on intake
#
ONLY for use in competition engines with independent engine management (throttle position sensor) or carburettors