Cat Cams is delighted to launch a new pair of ‘Sport’ profiles for the late model Citroen C2 VTS, running the 125 bhp 1.6-litre, 16-valve DOHC engine.

These VTS badged cars, produced between 2008 and 2009, use sharper cam profiles as standard compared to the 110 bhp VTR / GT versions of the C2 and this specially enhanced version of the TU5JP4-S powerplant is identified by its alloy inlet manifold.

Following detail design studies and back to back dyno testing, Cat Cams have optimised a profile that both enhances mid range and top end performance, while retaining a street friendly idle.

Technical details on the Cat Cams Citroen C2 VTS 125 bhp Sport profiles are as follows, shown in comparison to the original factory cams:

OEM : 248/240° - 206/200° - 9.00/8.70mm

1323703: 248/240° - 220/212° - 9.50/9.15mm

Carrying part number 1323703, the Cat Cams ‘Sport’ profiles for the 125 bhp Citroen C2 VTS feature modest increases in valve lift and duration to deliver a robust performance gain without upsetting low speed running and everyday driveability.

A direct swap for the standard C2 VTS camshafts, the Cat Cams 1323703 profiles are CNC ground from fresh castings and are directly compatible with the standard Citroen hydraulic followers.

When used in conjunction with an ECU remap (or piggyback ECU) to optimise the air / fuel ratio, testing by Nottingham based Citroen specialist Cituning proves that – in conjunction with an ECU remap - the Cat Cams 1323703 profiles deliver a peak power increase of up to 12 bhp @ 6500 rpm. Similarly, torque increases by 8lb.ft at 6000 rpm. These figures were recorded at the wheels, please see attached dyno plot.

For further information and sales advice please contact your nearest Cat Cams dealer.